Replacement Bushing Set for ThorBros S10 Lower Control Arms.

Includes all polyurethane and inner sleeves to do both arms.

Sold Individually. 4 required for a complete set.

This bushing is NOT to be used with a factory cross shaft.

Budget alternative to tubular upper control arms, Insane travel with stock upper control arms.
Lay frame on a 28.75" tire with stock upper arms, tubular lower arms, and 2" drop spindles

Test results from DJD Laboratories:

PPM SuperTravel Ball Joints, Tubular Lower Control Arms, and 2 inch drop spindles:

Top dead center of travel: 14.375 inches
Bottom dead center of travel: 3.875 inches
Total travel: 11.00 inches

Max tire to lay frame: 28.75 inches

Compared to:

Power Performance Stock Upper Ball Joints, Tubular Upper and Lower Control Arms, and 2 inch drop spindles:

• 
• 

Ditch that old, unsightly look of your upper S10 ball joints by covering them up with a beautiful set of CNC machined billet aluminum Power Performance Covers. These covers are simply held in place by a stainless button head bolt that replaces your existing zerk fitting. Now you will want to hang on to those zerks for future lubrication of the balljoint. It takes only a matter of seconds to take off the cover and install the original zerk fitting. It's a piece of cake!

Description:
These swaybar links are fantastic for applications where control arms have to be modified in order to lay out on big wheels.

Kit Includes:
2 Stainless Steel Teflon Injected Heim Joints
4 Zinc Plated Mis-alignment bushings
4 Stainless Poly Caps
4 Poly Urethane Bushings
4 Adjustment Spacers
Grade 8 Bolts

Sold in pairs.

You can now purchase our super beefy cross shafts that we manufacture for our own control arms. Our cross shafts are fully CNC Machined with our specially designed Anti-Loosening Locking system that prevents the shaft bushing bolt from ever backing out. This is a great item that will really accent your own control arm design.

In this kit you get the following:
2-Thorbecke Brothers Cross Shafts
4-Poly Bushings
4-Outer Sleeve Bushings that you weld to
All Locking Hardware and Shaft Bolts

SOLD IN PAIRS

• 

SOLD IN PAIRS

We are now selling the ball joint mounting tubes that we use on our own control arms. We are offering them so you guys that want to build your own lower arms can. These are CNC machined from DOM tubing. You just weld right to the tube, then press in the ball joint.

Ball joints included.

SOLD INDIVIDUALLY ********* ORDER 2 OF YOU NEED 1 PAIR

101-10019

SOLD INDIVIDUALLY ********* ORDER 2 OF YOU NEED 1 PAIR.