This 3 N 1 Behind & Under Axle Bracket allows you to keep your installation clean and free from "bracket clutter". This bracket has your 4 Link Bar Mounts, Lower Airbag Mounts, and Lower Shock Mounts all built into ONE! Can be used to set up a Parallel or Triangulated 4 Link system.
Sold in Pairs
Uses 2.75" wide 4 Link Bar Ends
Uses 5/8" Eyelet Shock
Upper Link Bar Tabs Included
3 Options for Lower Link Bar Placement
Available in 2.75", 3", 3.5", 4" Axle sizes
Laser Cut from 3/8" Steel Plate
Center of Axle to Center of Air Bag is 8"
Are you having problems figuring out a way to mount your lower shocks in a clean, non cluttered way? This bracket solves the problem. It sure beats adding extra shock mounting tabs that get in the way. Laser Cut from 1/4" material and available in many axle diameter sizes: 2.75", 3", 3.5" and 4".
Sold in pairs.$99.99
We cut these out of 3/16" HR sheet, which makes them very strong. We offer many sizes to cover all the different axle diameters. You can choose 2.75", 3", 3.25", 3.5" or 4". If there is a size you need that we don't offer, just call us up and we will make them for you. This is a weld on part.
Sold in pairs.
1-7/8" from top of axle to bottom of bracket.$29.99
This is a great lower bag mount. You would use this part in a situation where you want to keep the bag under the bed floor. You can mount it behind or in front of the axle, and was designed to fit sleeve or convoluted bags. These are laser cut from 1/4" HR sheet. We offer many sizes to cover all the different axle diameters. You can choose 2.75", 3", 3.5" or 4". This is a weld on part.
Sold in pairs.$69.99