View Cart | Items | Total $0.00 | Checkout
Total$0.00
Close

S10 5 link Wishbone Kit With Poly Bushings

$1,499.99
S105linkWishboneKitWithPolyBushings.jpg
Description:

It took us 6 months of R&D to get this kit ready. It turned out AWESOME! The time was well spent.

LOWER BAR LENGTH 17.25" CENTER TO CENTER.
MOVE LEAF HANGERS BACK 8.75"

Overview: 

This is what you get:
*New Gas Tank X-member Replaces your old one. It is raised up so that you have plenty of driveshaft clearance. Also serves as your upper link mounting x-member. Mounting bolts are included.
*Wishbone: Made from 1.5" DOM 3/16" wall seamless tubing. Very burly! The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.
*Differential Brackets: We decided to step above the rest of the bolt-on differential brackets. This bracket uses all 10 of the existing mounting bolts instead of just the top 5. Using all 10 bolts doubles the strength of the wishbone mounting location. To space this bracket out away from the cover lip, we use a ring that presses tightly against the pan to prevent any possible fluid leaks. Laser cut from 1/4" HR plate, and press formed. Mounting bolts are included.
*Adjustable Lower Bars: Made from 1.5" DOM 1/4" wall seamless tubing. We CNC cut and thread these bars to get a very precise thread fit. Our thread size is a whopping 1-1/8" in size. The end links are 1/4" thick and enclose Urethane bushings. TIG welded for superior strength.
*Axle Brackets: Laser cut from 1/4" thick HR plate. These weld to the bottom of the axle and hold the lower link bars in place.
*S10 Specific Step Notches: This weld in Notch is cut specifically to match the shape of the S10 frame rail. No trimming of the side plates is required. Perfect fit!
*Upper Shock Bar: The Upper Shock Bar mounts between the 2 step notches and has our new super strong shock mounts already welded in place for you. We use 1.5" DOM tube for our shock bar. It has a 3/16" wall thickness so you know that it is well overbuilt.
*Gas Charged GR2 Shocks.
*Airlift D2600 1/2" Ported Bags: In this kit we opted to use the Airlift D2600 airbag. It not only has a higher pressure rating than Firestone, but its rubber compound is very stable and durable. It holds it own shape very well. Props to Airlift on this one!
*Rear Lift Systems: This is where the magic of lift happens. The Rear Lift System consists of 2 lift bars made from 1.75" square tube with a 3/16" wall thickness, Upper Bag X-member (bolts in), Lift Bar Attachment X-member (bolts in), and the axle bracket to which the Lift Bars and linkage plates attach to (weld on). The lower bag mount is built into the Lift Bars. This lift kit allows you to lay frame on 20's, and gets you right around 11.5" of lift. Since the bags are mounted on the lift bars, the ride quality is much softer and not as bouncy like a bag over axle set up.
*Hardware: You get all the necessary grade 8 bolts to install your kit. All the pivot links come with Urethane bushings.
*Questions: Please call me with any questions. I will be more than happy to help you any way I can.